Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 1

FLAMMABILITY 0 PERSONAL PROTECTION A

Identity (As Used On Label and List)

A1005 Mega Clear

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

003-04-2010

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Ethyl Alcohol

64-17-5

1000 ppm

Propane/N-butane

68476-86-8

N/A

1000 ppm

2-Butoxy Ethanol*

111-76-2

50 ppm

20 ppm

This product contains the toxic chemicals marked with an * subject to the reporting requirements of Section 313 of the

Emergency Planning and Community Right-To-Know Act of 1986 and of 40CFR372.

Section III – Physical Chemical Characteristics

Boiling Point

N/A

Specific Gravity (H₂O = 1)

Concentrate

0.98

Vapor Pressure (mm/hg)

Melting Point

N/A

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

Solubility in Water

100%

Appearance and Odor— White foam with pleasant odor.

VOC% Content

12%

Section IV – Fire and Explosion Hazard Data

Flash Point (Method Used)

Flammable Limits

LEL

UEL

None

N/A

Extinguishing Media – Standard chemical fire extinguisher.

Special Fire Fighting Procedures –Wear self-contained breathing apparatus when indicated.

Unusual Fire and Explosion Hazards – Contents under pressure. Exposure to temperatures above 120ºF may cause bursting.

Page 2 of 2 for A1005 Mega Clear

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid – Temperatures above 120ºF

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – Strong oxidizers, alkalies, acids.

Hazardous Decomposition or Byproducts –None known.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

—

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

Eyes: May cause mild to strong irritation if in eyes.

Inhalation: Prolonged exposure may cause headache/dizziness.

Skin: May cause slight irritation.

Ingestion: May cause nausea.

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

See Health Hazards above.

Medical Conditions Generally Aggravated –None.

Emergency and First Aid Procedures.

Eyes—Flush with water for 15 minutes. Consult physician.

Inhalation—Remove to fresh air and consult a physician.

Skin—Wash effected area with soap and water.

Ingestion—Drink large amounts of water. Consult physician if irritation persists.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Mop or wipe up spill. Dispose of residue in accordance with federal, state and local regulations.

Waste Disposal Method – Wrap containers and place in trash collection. Do not puncture or incinerate container.

Precautions to be Taken in Handling and Storing –

Store in a cool, dry area. Keep away from heat, flames or sparks. Exposure to temperatures >120°F may cause bursting.

Other Precautions –N/A.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None.

Ventilation

Local Exhaust

None

Special

None

Mechanical (General)

None

Other

None

Protective Gloves –

None.

Eye Protection –

Safety goggles are recommended whenever chemicals are used.

Other protective Clothing or Equipment – None.

Work/Hygienic Practices – Wash hands after use. Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.