Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

consulted for specific requirements

HMIS

HEALTH                                                          1              REACTIVITY                                          

FLAMMABILITY                                            1              PERSONAL PROTECTION               

Identity (As Used On Label and List)

B4052  Mega Sorb

Note:  Blank spaces are not permitted.  If any item is not applicable, or no  information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

 

Fairfield, CA 94534

Date prepared

9-17-2009

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

None per 29CFR Part 1910.1200

     

     

     

     

     

 

     

     

     

     

     

 

     

     

     

     

     

 

     

     

     

     

     

 

     

     

     

     

     

 

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

Concentrate – Initial

     

Specific Gravity (H2O = 1)

Concentrate

N/A

Vapor Pressure

 

     

Bulk Density (Dry)

 

0.77 g/ml

Matrix Density

 

1.59

Evaporation Rate (Butyl Acetate = 1)

 

     

Solubility in Water

 

     

pH

 

3.0-4.0

Appearance and Odor— Dry, Tan colored particulates. Odor negligible.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

N/A

Will burn if ignited.

N/A

N/A

Extinguishing Media –water spray, foam, other as appropriate to surrounding materials.

Special Fire Fighting Procedures – Determined by on–site professionals based on individual circumstances.

Unusual Fire and Explosion HazardsNone Known

 


Page 2 of 2 for B4052 Mega Sorb

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid – None known

Stable

X

Incompatibility (Materials to Avoid) - Strong acids or alkali will inactivate biological cultures.

Hazardous Decomposition or Byproducts –Occurs with strong heat

Hazardous

Polymerization

May Occur

Conditions to Avoid –

Will Not Occur

X

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

 

Inhalation?

Skin?

Ingestion?

Health Hazards (Acute and Chronic) May cause eye, nose, or throat irritation. Avoid dust particles, which could be aspirated into lungs.

Physical Hazard- Dust particle nuisance.

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

     

Signs and symptoms of Exposure:

Eyes— May cause moderate irritation.

Skin— Prolonged or repetitive contact may result in irritation to allergic individuals.

Ingestion— Not toxic

Inhalation— May cause nose and throat irritation

Medical Conditions Generally Aggravated – None Known

Emergency and First Aid Procedures:

Eyes—Flush with large amounts of cool running water for at least 10-20 minutes while holding upper and lower lids open. Do not rub eyes as rubbing particles may scratch eye surface. If irritation persists or maintains seek medical attention.

Skin—Wash with soap and water.  If irritation persists seek medical attention.

Inhalation—Remove to fresh air. If difficulty in breathing develops and persists, call physician immediately.

Ingestion— Unlikely to occur.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

Small Spills- Sweep up and return to original container for later use.

Large Spills- Same as small spills.

Waste Disposal Method –

Biodegradable. If disposed of in its original form, this product does not meet criteria for hazardous waste. No special requirements.

Precautions to be Taken in Handling and Storing –

Handling/Hygienic Data- No special requirements.

Storage- Store in original container, keep tightly closed.

Other Precautions – None

Section VIIIControl Measures

Respiratory Protection (Specify Type) –

Avoid dust: Simple dust mask is recommended Avoid ingestion.

Ventilation

Local Exhaust

N/A

Special

     

Mechanical (General)

     

Other

     

Protective Gloves –

Gloves recommended if used in windy environment.

Eye Protection -

Safety glasses recommended if used in windy environment..

Other protective Clothing or Equipment –

Use ventilation that is adequate to keep employee exposure to airborne concentrations below exposure limits.

Work/Hygienic Practices - Normal.  Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

 

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.