Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 1

FLAMMABILITY 2 PERSONAL PROTECTION A

Identity (As Used On Label and List)

A1116 Linen Fresh Mist

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

4950 Fulton Dr Ste B

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

01-21-2005

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Acetone

67-64-1

1000 ppm

750 ppm

N/A

Isoprarafinic Hydrocarbon

64742-47-8

400 ppm

Propane

74-98-6

1000 ppm

N/A

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

180

Specific Gravity (H₂O = 1)

Concentrate

0.79

Vapor Pressure

Melting Point

N/A

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

Solubility in Water

Appearance and Odor—Clear spray with mulberry scent.

VOC% Content

30%

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Flammable

<100ºF (T.C.C)

N/A

Extinguishing Media – Standard dry chemical fire extinguisher.

Special Fire Fighting Procedures – Wear self-contained breathing apparatus whenever indicated.

Unusual Fire and Explosion Hazards –Contents under pressure. Exposure to temperatures above 120ºF may cause bursting.

Page 2 of 2 for A1116 Linen Fresh Mist

Section V – Reactivity Data
Stability	Unstable				Conditions to Avoid – Temperatures above 120ºF
	Stable			X
Incompatibility (Materials to Avoid) – Strong alkalies. High temperatures in the presence of strong bases, acids, strong oxidizing agents.
Hazardous Decomposition or Byproducts – None
Hazardous Polymerization	May Occur				Conditions to Avoid – None
	Will Not Occur			X

Section VI – Health Hazard Data
Route(s) of Entry:	Eyes? Yes				Inhalation? Yes		Skin? Yes			Ingestion? No
Health Hazards (Acute and Chronic) – See Below
Carcinogenicity:			NTP?			IARC Monographs?			OSHA Regulated?
			No			No			No
Signs and Symptoms of Exposure: Eyes—Strong irritation reddening. Skin—Mild irritation. Inhalation—Excessive exposure may cause slight dizziness.
Medical Conditions Generally Aggravated –None Known
Emergency and First Aid Procedures. Eyes—Flush with water for 15 minutes. Skin—Wash with soap and water. Contact physician if irritation persists. Inhalation—Remove to fresh air.
Section VII – Precautions For Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled. Wipe up with rag or use some absorbent clay material.
Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.
Precautions to be Taken in Handling and Storing – Do not use or store near heat or open flame. Exposure to temperatures above 120ºF may cause bursting.
Other Precautions –None
Section VIII – Control Measures
Respiratory Protection (Specify Type) – None
Ventilation		Local Exhaust			Adequate			Special		N/A
		Mechanical (General)			N/A			Other		N/A
Protective Gloves – N/A						Eye Protection – Safety glasses are recommended whenever chemicals are used.
Other protective Clothing or Equipment – N/A
Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.