Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

consulted for specific requirements

HMIS

HEALTH                                                   0          REACTIVITY                                         0

FLAMMABILITY                                     0          PERSONAL PROTECTION                  N/A

Identity (As Used On Label and List)

Q2028 Speedy Clean

Note:  Blank spaces are not permitted.  If any item is not applicable, or no  information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

 

Fairfield, CA 94534

Date Prepared

06-16-2011

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II – Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

None

 

 

 

 

 

 

 

 

 

 

 

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

 

 

 

 

 

 

Section III – Physical Chemical Characteristics

Boiling Point

 

250ΊF

Specific Gravity (H2O = 1)

Concentrate

1.068

Vapor Pressure (mm/hg)

 

N/A

Melting Point

 

N/A

Vapor Density (Air=1)

 

N/A

Evaporation Rate (Butyl Acetate = 1)

 

N/A

Solubility in Water

 

Complete

pH (as is)

 

3.0

Appearance and Odor—

Green liquid with mint fragrance.

Volatiles

 

N/A

Section IV – Fire and Explosion Hazard Data

Flash Point (Method Used)

Flammable Limits

LEL

UEL

None (Cleveland Open Cup)

 

N/A

N/A

Extinguishing Media – This product is not combustible.  Use water spray, foam, carbon dioxide, or dry chemical.

Special Fire Fighting Procedures – N/A

Fire and Explosion Hazards – None.

 

Page 2 of 2 for Q2028 Speedy Clean

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

Open flames, welding arcs or other high temperature sources that induce thermal decomposition, which produce toxic fumes.

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Strong alkalies, oxidizers, ammonia, and bleach.

Hazardous Decomposition or Byproducts – None.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

N/A

Inhalation?

N/A

Skin?

N/A

Ingestion?

N/A

Health Hazards (Acute and Chronic) –

See Below Signs and Symptoms below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

N/L

N/L

N/L

Signs and Symptoms of Exposure:

Eyes — Causes moderate irritation.  Prolonged and repeated contact can cause redness and tearing.

Skin — May cause dryness with prolonged contact.

Ingestion — Can cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Inhalation — Spray or mist can be irritating to the upper respiratory tract.

Medical Conditions Generally Aggravated – None known.

Emergency and First Aid Procedures: 

Eyes — Flush out immediately for at least 20 minutes with running water and seek medical attention.  Washing eyes within one minute is essential to minimizing eye damage.  Hold eyelids apart to ensure flushing of the entire surface.

Skin — Wash with water.  If irritation persists, seek medical attention.

Inhalation — Move person to fresh air and away from exposure.  If breathing is difficult, administer oxygen and seek medical attention.  Give artificial respiration if victim is not breathing.

Ingestion — Never give anything to an unconscious person.  If swallowed, induce vomiting.  Give large quantities of water or milk.  If vomiting occurs, keep airways clear.  Seek medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).  Stop leaks if you can do it without risk.  Do not touch damaged containers or spilled material unless wearing appropriate protective clothing (rubber boots and gloves).  Contain spills with dry earth, sand or other non-combustible material and transfer to containers.  Sweep up powder spills and transfer to containers.  DO NOT GET WATER INSIDE CONTAINERS.

Recommended Waste Disposal Method – The materials resulting from the clean up may be hazardous waste and, therefore, subject to specific regulations.  Package, store, transport, and dispose all clean-up material and any contaminated equipment in accordance with all applicable federal, state, and local health environmental regulations. 

Precautions to be Taken in Handling and Storing –

Keep in a cool, dry place.  Do not stack or palletize over three high.

Other Precautions – N/A

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None under normal use conditions.

Ventilation

N/A

Protective Gloves –

None under normal use conditions

Eye Protection -

None under normal use conditions.

Other Protective Clothing or Equipment – None under normal use conditions.

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after product use, eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.