Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 0 REACTIVITY 0

FLAMMABILITY 0 PERSONAL PROTECTION 0

Identity (As Used On Label and List)

B4118 Sponge Boy

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

08-17-2006

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

None

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III

Section 313

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

N/A

Specific Gravity (H₂O = 1)

Concentrate

0.00

Pressure

N/A

Melting Point

N/A

Density @ 20°C

Approx 10 g/l

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Insoluble

Appearance and Odor— White sponge like solid.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Not readily ignited

>580°C

N/A

Extinguishing Media –Extinguishing media, water, dry powder, carbon dioxide

Special Fire Fighting Procedures – None

Unusual Fire and Explosion Hazards – None

Page 2 of 2 for B4118 Sponge Boy

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

Humidity

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – None known

Thermal Decomposition– >350°C

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Inhalation?

No

Skin?

Yes

Ingestion?

No

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

None

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures. General advice: The first aid measures are valid exclusively apply to the contact with the developing dusts.

Eyes—Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Skin —Wash thoroughly with soap and water.

Inhalation—Keep patient calm, remove to fresh air.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

None

Waste Disposal Method – Must be dumped or incinerated in accordance with local regulations.

Precautions to be Taken in Handling and Storing –

May be kept indefinitely if stored properly.

Other Precautions – N/A

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Breathing protection if dusts are formed.

Ventilation

Local Exhaust

N/A

Special

N/A

Mechanical (General)

N/A

Other

Protective Gloves –

N/A

Eye Protection –

N/A

Other protective Clothing or Equipment – N/A

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.