Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     2      PERSONAL PROTECTION          B

Identity (As Used On Label and List)

B4135  Spot Off

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address Number,

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

05-09-2006

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Isopropanol*

67-63-0

 

-400 ppm

 

5-10

 

 

 

 

     

 

 

 

 

 

     

 

 

 

 

 

     

 

     

     

     

     

     

     

     

     

     

     

     

     

 

* This substance is a chemical subject to the reporting requirements of Section 313 of title III of the superfund amendments and

reauthorization act of 1986 (SARA) and 40 CFR part 372.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

Comparable with H2O

Specific Gravity (H2O = 1)

Concentrate

1.02

Vapor Pressure

 

N/A

% Volatile by Volume

 

85

Vapor Density (Air=1)

 

N/A

Evaporation Rate (Butyl Acetate = 1)

 

Comparable to H2O

Solubility in Water

 

Complete

Weight/Gallon (H2O=8.33#)

 

8.55#

Appearance and Odor—Clear, thin, slightly yellow liquid with light lemon odor.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Flammable

EST 145ºF (TCC)

2

12

Extinguishing Media – Foam, water, gas (CO2, halon) dry chemical.

Special Fire Fighting Procedures –If possible move containers from fire area and cool with water spray.  Wear protective clothing, eye, face, and skin protection and NIOSH/MSHA approved self contained breathing apparatus..

Unusual Fire and Explosion Hazards – None.

 


Page 2 of 2 for B4135 Spot Off

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

Keep from heat, sparks, open flames and other sources of ignition.

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Do not mix with other chemicals.

Hazardous Decomposition or Byproducts –Carbon monoxide may be formed during combustion.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic)

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

No

No

No

Signs and Symptoms of Exposure:

Eyes—May cause mild irritation.

Skin—May cause mild irritation and drying.

InhalationProlonged breathing of vapors may cause dizziness.

IngestionHarmful if swallowed.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures. 

Eyes—Flush thoroughly with plenty of water for at least 15 minutes, keeping eyelids apart.  If irritation persists get medical attention.

Skin—Wash with soap and water.  Remove clothing if contaminated.  If irritation persists get medical attention.

Inhalation—Remove to fresh air.  If any symptoms persist get medical attention.

Ingestion—Drink large quantities of water and induce vomiting if person is conscious.  Get medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Eliminate all ignition sources.  Rinse area with water or absorb with floor absorbent, sawdust or rags.

Waste Disposal Method – Flush down sanitary sewer system or place in sealed container and dispose of according to local regulations.

Precautions to be Taken in Handling and Storing –

Keep away from heat and sources of ignition.  Keep container tightly closed.

Other Precautions –Avoid contact wit skin and eyes.  Do not take internally

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Not Required

Ventilation

Local Exhaust

Adequate

Special

 

Mechanical (General)

 

Other

 

Protective Gloves –

Recommended

Eye Protection –

Recommended.

Other protective Clothing or Equipment – None required.

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.