Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     0      PERSONAL PROTECTION          A

Identity (As Used On Label and List)

B4047/B4047M   Super Block/Super Block Mini

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date prepared

01-02-2007

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

None

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

N/A

Specific Gravity (H2O = 1)

Concentrate

1.10

Vapor Pressure (mm/Hg)

 

N/A

Melting Point

 

N/D

Vapor Density (Air=1)

 

N/A

Evaporation Rate (Butyl Acetate=1)

 

N/D

Solubility in Water

 

Slowly dissolves in H2O

pH

 

N/A

Appearance and Odor— Wax like solid.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

 

None)

None

None

Extinguishing Media – CO2

Special Fire Fighting Procedures – None.

Unusual Fire and Explosion Hazards – None

 

Page 2 of 2 for B4047/B4047M  Super Block/Super Block Mini

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

None

Hazardous

Polymerization

May Occur

Stable

x

Will Not Occur

x

Incompatibility (Materials to Avoid) –None

Hazardous Decomposition or Byproducts – None.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

No

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

No

No

No

Signs and Symptoms of Exposure:

 

None

 

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures: 

Eyes—Flush with plenty of water for 15 minutes, call physician if irritation.

Skin— Flush with plenty of water for 15 minutes, call physician if irritation..

Ingestion— Get medical attention..

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled–

Gather solids and dispose of properly.

Waste Disposal– Any method for disposal of chemical wastes object to local, state and federal regulation.

Precautions to be Taken in Handling and Storing –

Store in a cool, dry area.  Keep container closed.

Other Precautions – KEEP OUT OR REACH OF CHILDREN.  Do not take internally

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None necessary

Ventilation

Local Exhaust

 

Special

 

Mechanical (General)

None necessary

Other

 

Protective Gloves –

Rubber

Eye Protection –

None necessary

Other protective Clothing or Equipment – None necessary

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.