Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 0

FLAMMABILITY 0 PERSONAL PROTECTION B

Identity (As Used On Label and List)

A1121 Tire Shine

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

05-29-2009

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Polydimethylsiloxane

63148-62-9

N/E

Liquefied Petroleum Gas

68476-86-8

1000 ppm

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

>200°F

Specific Gravity (H₂O = 1)

Concentrate

0.992

Vapor Pressure (can; psig@ 72°F )

50 psi

Melting Point

N/A

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Emulsion

7.0 – 8.0

Appearance and Odor—Opaque, white liquid with low odor.

VOC % of Content

9.15%

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non-Flammable

None

N/A

Extinguishing Media – Dry media, CO₂, foam.

Special Fire Fighting Procedures –Wear self-contained breathing apparatus and protective clothing. Cool fire exposed containers to prevent rupturing.

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

None known

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Page 2 of 2 for A1121 Tire Shine

Incompatibility (Materials to Avoid) – Strong oxidizing agents, strong acids, and strong bases.
Hazardous Decomposition or Byproducts – Carbon dioxide, carbon monoxide, formaldehyde and possibly low levels of other alcohols, ethers, and organic acids.
Section VI – Health Hazard Data
Route(s) of Entry:	Eyes? Yes			Inhalation? Yes			Skin? Yes		Ingestion? Yes
Health Hazards (Acute and Chronic) – See Below
Carcinogenicity:			NTP?		IARC Monographs?			OSHA Regulated?
			No		No			No
Signs and Symptoms of Exposure: Eyes—May cause mild irritation. May aggravate preexisting conditions. Skin—Frequent or prolonged contact may cause irritation. Repeated exposure may result in excessive drying and defatting of the skin and possibly dermatitis. Inhalation—Inhalation of mist can cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respiratory tract, headaches, dizziness, drowsiness, nausea, unconsciousness, other central nervous system effects, and possibly even death from asphyxiation depending on time of exposure. Ingestion— Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into the lungs can cause pulmonary injury. Repeated ingestion can damage the liver and blood.
Medical Conditions Generally Aggravated – May aggravate existing skin disorder.
Emergency and First Aid Procedures. Eyes—Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately. Skin—Wash with soap and water. If irritation persists seek medical attention. Inhalation—Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration. Ingestion—Do not induce vomiting. Seek medical attention immediately.
Section VII – Precautions For Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled. Allow propellant to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat sources and open flame far away from spill or leak. Cover with absorbent a material and sweep up. Wash area to prevent slipping. Dispose of soaked absorbent material in accordance with Federal, State, and local laws.
Waste Disposal Method – Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled. Consult Federal, State and local authorities for approved procedures.
Precautions to be Taken in Handling and Storing – Store in a cool, dry area away from heat or open flame. Do not store at temperatures above 120ºF.
Other Precautions—KEEP OUT OF REACH OF CHILDREN
Section VIII – Control Measures
Respiratory Protection (Specify Type) – None needed for proper use in accordance with label directions.
Ventilation		Local Exhaust		Adequate		Special
		Mechanical (General)				Other
Protective Gloves – Use chemical resistant gloves if hand contact will be made.						Eye Protection –Always wear safety glasses or chemical proof goggles when using aerosol products.
Other protective Clothing or Equipment – N/A
Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.