Material Safety Data Sheet May be used to Comply with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be Consulted for specific requirements

HMIS

HEALTH 1 PHYSICAL HAZARD 0

FLAMMABILITY 1 PERSONAL PROTECTION B

Identity (As Used On Label and List) A1231 Green Cut

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for: OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number: 1-800-424-9300

Address (Number, Street, City, State, and Zip Code) 101 Grobric Ct #1

Telephone Number for Information: 1-800-571-7347

Fairfield, CA 94534

Date Prepared 10-09-2007

Signature of Prepare (Optional) REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components (Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits Recommended.

%(Wt.)

Non-Hazardous, mixed natural oils

Proprietary

N/E

N/E

Carbon Dioxide

124-38-9

5000 ppm

5000 ppm

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III

Section 313

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

N/E

Specific Gravity (H2O = 1) @ 70°F Concentrate

0.90

Vapor Pressure (can; psig @ 72°F)

70 psi

Total VOC%

<5%

Vapor Density (Air=1)

>1

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Insoluble

pH

N/A

Appearance and Odor— Clear, light amber liquid with bland odor.

Section IV – Fire and Explosion Hazard Data

Flammability (as per CSMA Flame Projection Test)

Flammable Limits

LEL

UEL

Non Flammable Spray

>300°F

N/A

N/A

Extinguishing Media – Foam, CO2, dry media.

Special Fire Fighting Procedures – Wear self contained breathing apparatus and protective clothing. Cool fire exposed containers to prevent rupturing.

Unusual Fire and Explosion Hazards –Exposure to temperature above 120°F may cause bursting.

Page 2 of 2 for A1231 Green Cut

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid – Do not store at temperatures above 120°F.

Hazardous Polymerization

May Occur

Stable

x

Will Not Occur

x

Incompatibility (Materials to Avoid) – Strong oxidizing agents.

Hazardous Decomposition or Byproducts –Carbon dioxide, carbon monoxide.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes? Yes

Inhalation? Yes

Skin? Yes

Ingestion? Yes

Health Hazards (Acute and Chronic) – See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

No

No

Signs and Symptoms of Exposure: Eyes—May cause irritation, redness, and tearing. Skin— Frequent or prolonged contact may cause mild irritation. May aggravate existing skin conditions. Inhalation—Inhalation of mist can cause irritation of nasal and respiratory passages. Frequent or prolonged exposure may cause irritation to the upper respiratory tract, coughing, dizziness, nausea and headache. Ingestion—Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into the lungs may cause pulmonary injury.

Medical Conditions Generally Aggravated –None Known.

Emergency and First Aid Procedures. Eyes— Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately. Skin—Wash with soap and water. If irritation persists seek medical attention. Inhalation— Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration. Ingestion— Do not induce vomiting. Seek medical attention immediately.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled. Allow propellant to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat sources and open flame far away from spill or leak. Cover with absorbent material and sweep up. Wash area to prevent slipping. Dispose of soaked absorbent material in accordance with Federal, State and local laws.

Waste Disposal Method –. Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled Consult Federal, State and local authorities for approved procedures.

Precautions to be Taken in Handling and Storing – Store in a cool, dry area away from heat or open flame. Do not store at temperatures above 120°F.

Other Precautions –KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) – None needed for proper use in accordance with label directions

Ventilation

Local Exhaust

Adequate

Special

Mechanical (General)

Adequate

Other

Protective Gloves – Use chemical resistant gloves if hand contact will be made.

Eye Protection –Always wear safety glasses or chemical proof goggles when working with chemicals

Other protective Clothing or Equipment –N/A

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.